.

KTM Freeride 350

.  

Make Model

KTM Freeride 350

Year

2014-15

Engine

Four stroke, single cylinder. DOHC with finger followers, 4 Valve per cylinder,

Capacity

349 cc / 21.3 cu-in
Bore x Stroke 88 X 57.5 mm
Cooling System Liquid Cooled
Compression Ratio 12.3:1

Induction

Keihin EFI, flow restrictor 42 mm

Ignition 

Contact less, controlled, fully electronic ignition system with digital ignition timing adjustment
Starting  Electric

Max Power

Max Torque

Clutch Wet multi-disc clutch, Brembo hydraulics

Transmission 

6 Speed, claw shifted
Final Drive Chain 5/8 x 1/4" X Ring
Primary Ratio 24:73
Frame Perimeter steel-aluminium composite frame

Front Suspension

WP Suspension4357 MXMA
Front Wheel Travel 250 mm / 9.8 in

Rear Suspension

WP-PDS shock absorber,
Rear Wheel Travel 280 mm / 10.2 in

Front Brakes

Single 260mm disc 2 piston caliper

Rear Brakes

Single 210mm disc 1 piston caliper

Front Tyre

80/100-21

Rear Tyre

110/90-19
Steering Head Angle  67°
Wheelbase 1428 mm / 56.2 in
Seat Height 915 mm / 35.2 in
Ground Clarence 325 mm / 12.8 in

Dry Weight

101 kg / 222.7 lbs

Fuel Capacity 

5.5 Litres / 1.22 US gal

 

Freedom has a name: With the FREERIDE 350, the rider alone decides where to ride. In its first year on the market, it got a lot of people very excited who always fancied doing a little off-road riding without any pressure. For the upcoming model year, KTM places a clear development focus on even more practicality and versatility for the FREERIDE 350. For example, a taller sixth gear and final gearing lower the revs and fuel consumption on back roads stages, while the shortened five lower gears still ensure optimum off-road traction. Numerous optimised details serve to make the new FREERIDE 350 even more durable and reliable or contributeto reducing its astonishingly low weight still further.

Key Features

Design Single-cylinder, 4-stroke, spark-ignition engine, liquid-cooled

Displacement 349.7 cm³

Starting aid Electric starter

Weight without fuel approx.

Features and Benefits

ENGINE

Based on the successful engine of the 350 EXC-F, the FREERIDE 350's drive unit was optimized for a pleasant torque response instead of maximum power and has been developed still further by KTM for model year 2014. The crankshaft drives a geared intermediate shaft mounted on the side, which in turn drives both the camshafts and the coolant pump while doubling as a balancer shaft. The compact design receives a modified exhaust camshaft with an optimised automatic decompression for even better starting. The four steel valves, now with reinforced spring retainers, are actuated by two overhead camshafts and DLC coated finger followers. Combined with a new gasket, a redesigned coolant pump cover ensures an easier assembly for an improved seal even at extreme temperatures. Placed well protected behind the cylinder, the electric starter receives a reinforced freewheel assembly for the new model year. With a state-of-the-art closed loop lambda control, the Keihin engine management system with electronic fuel injection and 42mm throttle body ensures an efficient exhaust gas treatment by the two catalytic converters, as well as very high fuel efficiency for an off-road bike. Using the optional map select switch from the PowerParts range of accessories, the rider may select additional engine response characteristics.

GEARBOX

Specially designed for the FREERIDE models, the new 6-speed transmission is distinguished by shorter gear ratios in the lower five gears while the sixth gear, now geared some ten per cent taller, ensures more relaxed engine speed levels on back roads. To match the new transmission, the final gearing has been made a little taller by replacing the 11-tooth chain sprocket with a 12-tooth one.

 

CSS CLUTCH

The new, undampened CSS clutch and the revised Formula hydraulic system deliver convincing durability as well as optimum separation and a precise action while at the same time saving weight.

FRAME, REAR SUBFRAME AND SWING ARM

A lightweight composite frame made of stainless steel sections and bolt-on, forged aluminium components gives the FREERIDE 350 the stability needed for off-road duty at minimum weight. The light, rigid polymer rear subframe with well protected recessed grips also houses the engine management electronics. A reworked chain guide on the lightweight aluminium swing arm provides more stability and keeps the chain safely in postion.

MASTER CYLINDERS & SPEEDOMETER

Like the new callipers, the brake and clutch levers and mastercylinders have sand blasted outer surfaces and black covers. Inside, they feature revised piston systems for an optimised lever feel and consistent brake and clutch action even under heaviest duty. The new Trail Tech digital combination instrument with integral control lights is distinguished by plenty of practical functions and an especially intuitive operation.

RIMS, TYRES AND BRAKES

Like the two-stroke sister model, the FREERIDE 350 receives new laced wheels with anodized GIANT aluminium rims, CNC machined hubs and aluminium spoke nipples for the upcoming model year. Specially developed by Maxxis, the new Trial-Maxx tires make the four-stroke bike noticeably more agile. In addition they are more reliable and provide better traction especially in the wet. In addition, thanks to the standard Enduro tire dimensions of 2.75-21 front and 4.00-18 rear, the versatile off-road bike is able to use a wide choice of tire alternatives for special purposes. For 2014, the FREERIDE 350 also receives the new Formula braking system with lightweight wave brake discs and radial, sand blasted callipers with four pistons in front and two pistons in the rear.

FRONT FORKS AND REAR MONOSHOCK

A new setting of the 43mm WP upside-down front forks (250mm of travel) and top quality, CNC machined triple clamps enhance the riding stability of the new FREERIDE 350 even further. In the rear, a newly developed WP PDS monoshock with a progressive spring and with 260mm of travel ensures a comfortable ride and much more reserves. Damping is separately adjustable for compression and rebound, while the monoshock even has separate low and high speed controls for the compression stage. For the FREERIDE 350 there is also a suspension travel reduction kit in the KTM PowerParts accessory range to lower the seat height by another 25mm.

EXHAUST SYTEM

In designing the exhaust system, the engineers focused on low noise and emissions as well as great rideability with heaps of smoothly delivered torque. Well protected by the frame and a solid skid plate,the central header pipe guides the exhaust beneath the engine to the twin rear aluminium silencers. With a catalytic converter each, the silencers ensure an efficient exhaust treatment while lowering the noise to environmentally friendly levels.

BODYWORK AND GRAPHICS

Due to the extremely slim seat and spoiler lines, the FREERIDE 350 bodywork offers the rider unrestricted mobility and especially ergonomic contact patches. Most of the new graphics are directly integrated into the polymer parts as inmould graphics, a contemporary, very rugged and lightweight solution.