.

Honda CBR 250RR

.  

Make Model

Honda CBR 250RR

Year

2019 - 20

Engine

Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder

Capacity

249.7 cc / 15.2 cu-in
Bore x Stroke 62.3 x 41.4 mm
Cooling System Liquid cooled
Compression Ratio 11.5: 1
Lubrication Wet (Pressing and Spray)

Induction

PGM-FI, Throttle-By-Wire System with Accelerator Position SensoR

Ignition 

Full Transisterized, Battery

Starting Electric

Max Power

36.3 hp / 27.0 kW  @ 12500 rpm

Max Torque

23.3 Nm / 17.2 lb-ft @ 10500 rpm
Clutch Wet multiplate with Coil Spring

Transmission 

6 Speed 
Final Drive #520 O-ring-sealed chain
Frame Truss frame

Front Suspension

Inverted front telescopic suspension

Rear Suspension

Aluminum Swing Arm (5 Adjustable Mono With Pro-link Suspension System

Front Brakes

Single 310mm disc 2 piston caliper

Rear Brakes

Single 240mm disc 1 piston caliper

Front Tyre

110/70-MC17

Rear Tyre

140/70-MC17
Dimensions Length  2060 mm / 81.1 in
Width   724 mm / 28.5 in
Height  1097 mm / 43.2 in
Wheelbase 1389 mm / 54.7 in
Seat Height 790 mm / 31.1 in
Ground Clearance 144 mm / 5.7 in

Wet Weight

164.5 kg / 363 lbs

Wet Weight  ABS

167.8 kg / 370 lbs

Fuel Capacity 

14.5 Litres / 3.8 US gal
.  

The Honda CBR250RR is powered by a newly developed water-cooled 4-stroke 4-valve straight-twin DOHC 250cc engine, which aims for class-leading output performance. The engine is easy to handle for urban riding, while it is just as comfortable on the circuit, with smooth output characteristics across the entire revrange. In addition, its Throttle-by-Wire (TBW) system and selectable 3-way engine mode settings allow the rider to tap into its linear power output at will, for a superior, solid acceleration.
To make the engine very compact, many technologies were applied such as laid primary driver gears for the cam chain, oil pump on the right side that is integrated with the machine, the respiratory machine behind the cylinder, and put a water pump in the cylinder head as applied in RC213V. The width of the new 2-cylinder engine is almost identical to the one-cylinder engine in the same capacity, thanks to the technology applied in this CBR250RR engine.

Another significant part in the layout of the power unit is Downdraft air intake. The air filter was removed from its usual position behind the cylinder and is now placed above the cylinder, the air intake has reduced resistance and provides optimal flow throughout the speed range.
To offer optimal control in any situation, Honda has implemented the latest technology that is throttle-by-wire , known as TBW. The 2017 CBR250RR is the first model in its class to have a TBW system. This feature helps bring in a more precise feel when rolling on the throttle compared to its counterpart.
The Accelerator Position Sensor (APS) detects and automatically sends electrical signals to the ECU. This system is also applied to the RC213V.
The CBR250RR’s front face inherits the CBR series’ identity with its dual-LED headlights, enhancing its strong, fast and exciting image. The sharp wedge-shape leading from its low, long nose to its high, acute tail inspire awe in the eyes of the onlooker.

The styling of this model adapted from the evolution of each function together with the latest technological development. Their design theme “Speed Shape” presents an attractive and functional appearance that gives a pleasurable riding experience before you’re even moving.
Sharp lines are seen starting from the bottom, the front to the rear silhouette are tapered to present an aggressive presence.
Honda is tapping into their recently adopted “layered cowl”, to optimize the flow of air while riding to better aid the engine cooling process and also contribute to optimal control and feedback. In terms of design, Honda has always given priority to the results of each function, so the styling is determined through a deep understanding of the function of each part. Styling fundamentally contributes to the motorcycle when maneuvering. Honda makes the design from the outside, then proceeds to the frame, the engine and the suspension.

The CBR250RR’s newly designed steel pipe truss frame realizes both strength and flexibility. Its swing arms are Aluminum gull arms, and with the right-side swing arm shaped to reduce exhaust pipe extrusion, allows the bike to be slimmer, while retaining bank angle. The suspension features high rigidity inverted forks for the front, and Pro-link suspension featuring 5-step preload for the rear. For the brakes, front and rear ABS is available (for the ABS model). Large 310mm diameter (front) and 240mm diameter (rear) wave discs provide outstanding stopping-power.
The swing arm type is a gull-arm made of aluminum through the process of Gravity Dies Casting (GDC) which results in a reduction of the overall weight. It also helps with the exhaust layout to be closer to the center of gravity while still optimizing the tilt angle when maneuvering. The swinging arm connected with the main frame using Pro-Link suspension.
The front suspension is an inverted fork from Showa with the size coming in at 37mm that helps reduce the un-sprung weight.
The CBR250RR 7- spoke wheels are designed exclusively for this CBR with the emphasis in weight reduction.