.

Ducati 350 Mark 3D

.  

Make Model

Ducati 350 Mark 3 D

Year

1968

Engine

Four stroke, single cylinder, SOHC, bevel gear driven

Capacity

340.2cc / 20.8 cu in
Bore x Stroke 76 x 75 mm
Compression Ratio 9.5:1

Induction

Dell'Orto SS129D

Ignition

Points, coil, 6V30W generator

Battery

Yuasa B38 12Ah

Spark Plug

Marelli CW260N / Lodge 2HN

Starting

Kick

Max Power

24.8 kW / 34 hp @ 8500 rpm

Clutch

Wet, multiplate

Primary Drive Ratio

2.111:1

Transmission

5 Speed

Gear Ratios

1st 2.46 / 2nd 1.73 / 3rd 1.35 / 4th 1.10 / 5th 0.97:1

Final Drive

Chain

Final Drive ratio

3.214:1

Front Suspension

31.5 mm Ducati telescopic hydraulic fork

Rear Suspension

Swingarm, Twin Marzocchi shocks, 3-way adjustable

Front Brakes

180mm Drum

Rear Brakes

160mm Drum

Front Tyre

2.75-18

Rear Tyre

3.00-18

Dimensions

Length: 2000 mm / 78.7 in
Width:    600 mm / 23.6 in
Height:   940 mm / 37.0 in

Seat Height

735 mm / 28.9 in

Dry Weight

128 kg / 282 lbs

Fuel Capacity 

15 Litres / 4.0 US gal / 3.3 Imp gal
Top Speed 170 km/h / 106 mph
Road Test Ducati MK3 Group Test
.  

In 1967, Ducati launched a redesigned frame featuring twin tubes running from the back of the gas tank down to the swingarm pivot. This new frame required a wider rear engine case mount — approximately 3 inches wider than the front — and these subsequently became known as “wide case” engines. Between the two styles, narrow and wide case, the basic architecture remained the same.

Ducati brought the new frame and wide case engine design to the street in 1968, first in the street-legal 350cc Scrambler, then also in 250cc and 450cc models. All of these used a bevel drive overhead cam with valve springs. During 1968, Ducati finally brought a desmo to the street with the launch of the 250 and 350 Mark 3 D — “D” for Desmo.

The 1968 Ducati 350 Mark 3 Desmo featured a red frame, a red and chrome gas tank with twin-filler caps, chrome fenders, steel rims, a high-lift cam and a tachometer. In 1969, the 250 and 350 were joined by a 450 Mark 3 Desmo, and they were outfitted with a black frame and a single-cap fuel tank and chrome fenders. Non-desmo Ducatis feature a dull silver paint in place of the chrome.

Ducati’s 350cc single-cylinder desmo engine is all alloy with polished cases and massive finning on the barrel, which features a cast iron liner. Bore and stroke are 76mm by 75mm for a capacity of 340cc, with a 10:1 compression ratio. The 5-speed unit construction gearbox has a heel/toe shifter on the right side of the engine, with the kickstarter on the left.

Cycle magazine tested the Mark 3 D Ducatis, including the 250, 350 and 450 models, which, apart from engine size, are of the same overall dimensions. “The Ducati’s single-cylinder engine has narrow cases; therefore, the frame, the tank and the footpegs can all be very narrow, too. You can fit yourself more easily to a well-laid-out narrow motorcycle than you can to the fat bikes, and the result is a feeling of instant confidence … the Ducatis feel as though they had been built just for you, and that they weren’t something that came out of a crate,” Cycle said.

Of the 350cc desmo engine, they wrote: “The 350 was more highly tuned and had a narrower powerband; the power came in at about 6,500rpm. The 350 is tuned as a street dragster; the 250 and the 450 are over-the-road bikes.”

Source: Motorcycle Classics