.

Yamaha IT 175

.  

Make Model

Yamaha IT 175

Year

1981

Engine

Two stroke, single cylinder, reed-valve inducted

Capacity

171 cc / 10.4 cu-in
Bore x Stroke 66 x 50mm
Cooling System Air cooled
Compression Ratio 7.9:1

Induction

32mm Mikuni carburetor

Ignition 

CDI 
Starting Kick

Max Power

19.86 hp / 14.6 kW @ 8000 rpm

Max Torque

18.47 Nm / 13.63 lb-ft @ 7500 rpm
Clutch Wet, multi-disc

Transmission

6 Speed 
Final Drive Chain
Frame Single-downtube, full cradle, chromoly frame, box section aluminum swingarm

Front Suspension

Telescopic forks

Rear Suspension

Monoshock with adjustable damping and pre-load

Front Brakes

Drum

Rear Brakes

Drum

Front Tyre

3.00 x 21

Rear Tyre

4.10 x 18
Wheelbase 1417 mm / 55.8 in
Seat Height 899 mm / 35.4 in
Ground Clearance 290 mm / 11.4 in

Wet Weight

104.1 kg / 229.5 lbs

Fuel Capacity

11 Litres / 2.9 US gal
.  

Yamaha IT175 belongs to the 'International Trial' family of motorcycles, produced during the 1970s and 1980s. The machine is derived from the Yamaha YZ range of competition motocross bikes with modifications for use in competition enduro, hare and hounds and trail riding.

The bike uses an air cooled, two stroke, single cylinder engine with pre-mixed fuel. It is kick start only and features a minimum level of equipment required to allow it to qualify for road certification.

There are three derivations of the machine for the global market. A US & Canada market version, a European version and an Oceanic version for other world markets. The IT175 can be road registered in all these regions.

Other bikes in the IT range include IT125, IT200, IT250, IT465 and IT490.

The IT range was superseded by the WR (Wide Ratio) range of four stroke machines as the popularity of two stroke engines began to wane.