.

 Krämer GP2-890RR

.  

Make Model

Krämer GP2-890RR

Year

2024

Engine

Four-stoke, parallel twin, DOHC, 4-valves per cylinder

Capacity

889 cc / 54.3 cu in

Bore x Stroke

90.7 x 68.8 mm

Compression Ratio

14:1 with High-Compression, Two-Ring, Pankl Piston

Cooling System

Liquid cooled

Exhaust

Stainless Steel 2-1, 105 dB (103 dB with Insert)

Induction

Dell’Orto 48mm throttle body

Ignition

Mectronik MKE7 ECU with Ride-by-Wire and Inertial Measurement Unit (IMU)
Dash AiM MXS 1.3 Race GPS with Data Logger
Electronics Adjustable Traction Control (9 Levels + Off), Adjustable Wheelie Control (5 Levels + Off), Pitlane Speed Limiter

Starting

Electric

Max Power

102.9 kW / 138 hp @10100 rpm

Max Torque

100 Nm / 73.8 lb-ft @ 8200 rpm

Clutch

PASC slipper clutch, hydraulically aqctuated

Transmission 

6-Speed

Final Drive

DID ERV 520 Racing X-Ring Chain

Frame

Chromoly (25CrMo4) Steel-Trellis Frame, powder coated red

Front Suspension

WP Apex Pro 7543, Closed-Cartridge, Fully Adjustable, Split-Function Damping with Krämer Shim Stack

Front Wheel Travel

120 mm / 4.7 in

Rear Suspension

WP Apex Pro 7746, Fully Adjustable, High & Low-Speed Compression, Remote Preload, Ride-Height, with Progressive Linkage

Rear Wheel Travel

140 mm / 5.5 in

Front Brakes

2 x 290mm Full-Floating Rotors with Brembo Stylema Calipers

Rear Brakes

Single 230mm Full-Floating Rotor with Brembo P2 Caliper

Front Rim

Forged Aluminum Dymag UP7X 3.5" x 17"

Rear Rim

Forged Aluminum Dymag UP7X 6" x 17"

Seat Height

Adjustable

Wet Weight

142 kg / 313 lbs
Fuel Capacity  16 litres / 4.2 US gal

Body

Fibreglass Fairing with Carbon/Kevlar Reinforcement (Painted), XPE Fuel Tank/Seat
.  

Krämer Motorcycles is proud to announce the latest addition to its lineup of purpose-built track motorcycles: the 2024 Krämer GP2-890RR supersport.

The peak of performance, the new Krämer GP2-890RR debuts with class-leading specifications, including the best power-to-weight ratio in the category, with 138 hp on-tap and a ready-to-race weight of 313 lbs.

The highest evolution of the critically regarded GP2 platform, the RR-spec brings traction control and wheelie control to the offering, along with improved aerodynamics and refined chassis characteristics.

A limited-edition motorcycle, only 125 units of the Krämer GP2-890RR will be made for the global market, with each bike’s edition number engraved on the triple clamp.

“The Krämer GP2-890RR is the pinnacle of what we are capable of achieving with our GP2 racing platform, and therefore it is the first bike worthy of an ‘RR’ designation from our factory,” explained Markus Krämer, CEO and Founder of Krämer Motorcycles.

“We are immensely proud of the Krämer GP2-890RR and what it represents for our team, as it showcases our current level of capabilities as a motorcycle brand. The GP2-890RR is the perfect way to start this new chapter for our company, as we get ready to open our new factory and debut our new corporate branding.”

Propelling the Krämer GP2-890RR to the front of the pack is an 889cc parallel-twin motor from KTM, which produces 138hp (101 kW) at 10,100 rpm and 74 lbs•ft (100 Nm) of torque at 8,200 rpm. An increased redline of 11,500 rpm comes to the GP2-890RR as well, thanks to new lightweight engine internals and advanced engine management software.

Designed with true German engineering, the centerpiece of the GP2-890RR is its chromoly steel-trellis frame, which provides exceptional stiffness and rigidity, while helping bring the GP2-890RR to a staggeringly-light racing weight of 313 lbs (142 kg).

Additional weight savings comes from the unique fuel cell design, which uses a rotationally molded plastic fuel tank that doubles as the bike’s tail section. The fuel cell carries a maximum of 4.2 gallons (16 liters) of fuel, and holds it in an optimized position for weight distribution, even as the fuel level drops over the course of a race.

Befitting a motorcycle of this caliber, the 2024 Krämer GP2-890RR is equipped with premium components, including dual Brembo Stylema calipers, forged aluminum Dymag wheels, and top-shelf WP Apex Pro suspension pieces.

“A no-compromises race bike, the Krämer GP2-890RR exemplifies what is capable when your sole focus is on pure track performance,” said Jensen Beeler, Global Head of Sales at Krämer Motorcycles.

“We invite racers, track day riders, and the competition to come experience the Krämer GP2-890RR on the track, to see where the high-water mark has now been set in the supersport category.”

Available starting in September 2023, the Krämer GP2-890RR will be the first motorcycle to roll off the assembly line at Krämer’s new factory in Burghausen, Germany. It will also be the first Krämer motorcycle to carry the company’s new logo design, marking a new decade for Krämer Motorcycles.

Engine

A sizable upgrade over the GP2-890R model, the new RR-spec sees its 889cc parallel-twin KTM motor making an additional 8hp thanks to some key changes to its internal components.

These changes include titanium connecting rods from Pankl, a high-compression piston also from Pankl, titanium valves (intake and exhaust), and a new camshaft with a racing-focused profile.

Other improvements include CNC machining of the cylinder head ports, 48mm throttle bodies, an improved ram-air system, and an optimized exhaust pipe.

These improvements bring the peak output of the Krämer GP2-890RR to 138 hp (101 kW) and 74 lb•ft (100 Nm) of torque — a healthy increase over the GP2-890R model as well as a noticeable power gain over the Krämer-made KTM RC 8C variant.

Beyond the spec-sheet, the Krämer GP2-890RR boasts an impressively flat torque curve throughout its entire rev range, and with a new quick-turn throttle tube (with 55° of rotation), getting on the power is not only quick, but also predictable.

Electronics

Further improvements to the powertrain come thanks to a new ECU configuration, using a Mectronik computer with an integrated six-axis inertial measurement unit (IMU). This system provides the Krämer GP2-890RR with its traction control and wheelie control parameters, giving even more security to riders who are racing at the limits of tire adhesion.

The Mectronik ECU also allows for the use of a wide-band oxygen sensor, which measures the burn efficiency of the combustion chamber through the exhaust pipe, and changes the fuel mapping in real-time to ensure maximum power in all conditions.

Lastly, the Mectronik ECU is an open system, meaning that Krämer customers will be able to reprogram and flash the ECU with their own settings, or ones that they download from Krämer and other GP2-890RR owners. Krämer Motorcycles intends to support RR owners in the future with free software updates and upgrades.

Interfacing with the rider on the Krämer GP2-890RR is an AiM MXS 1.3 dash, which not only works as a full-color TFT head unit, but is also an impressive data-logging platform. With GPS lap times, a database of track maps, and fully connected to the bike’s internal sensors, the AiM MXS 1.3 allows riders to use the intuitive Race Studio software to study and perfect their track sessions.

Chassis

The Krämer GP2-890RR continues the company’s use of 25CrMo4 chromoly steel for its trellis-design frame, as the alloy provides the ideal stiffness and torsional rigidity for racing use.

Knowing that every rider is different, adjustment points can be made for the swingarm angle, steering-head angle, triple clamp offset, seat height, rearset position, and clip-on angle and length, all of which makes for a truly customizable motorcycle that fits riders of all sizes and skill levels.

Extra attention has been made to the cast aluminum swingarm on the GP2-890RR, with a progressive linkage added to the shock mount. Adding more feel at the bottom of the stroke, while also reducing pumping effects, the new linkage has been race-proven on the GP2-890RR in the British Superbike Championship, where Krämer has dominated the GP2 class.

Utilizing premium suspension pieces, at the front of the GP2-890RR, riders will find fully adjustable WP Apex Pro 7543 closed-cartridge forks. At the rear of the machine, there is a matching WP Apex Pro 7746 shock, which features both high-speed and low-speed compression settings, in addition to preload, rebound, and ride-height adjustments.

The settings on these suspension units have been optimized for the added power coming from the Krämer GP2-890RR engine, and they have been also modified for more adjustability in their settings, especially when compared to the suspension pieces on the Krämer GP2-890R and KTM RC8C.

Reigning-in that power are dual 290mm rotors, which are mated to Brembo Stylema calipers and a Brembo 19RCS Corsa Corta master cylinder. Meanwhile, at the rear of the bike is a fully floating 230mm rear disc.

Lightweight and durable forged aluminum Dymag UP7X wheels complete the chassis package, with a 3.5” x 17” rim at the front, and a 6” x 17” rim at the back that can accommodate tires ranging from 180/60 to 200/55 in size. Pirelli Diablo Superbike SC1 slicks are fitted as standard, with their compound and carcass design best-complimenting the GP2-890RR chassis philosophy.

Fairing

To earn its “RR” designation, every part of the GP2 had to evolve in order to become the Krämer GP2-890RR, and that includes the already aerodynamic and eye-catching fairing design from the GP2-890R model.

Reducing the front cross-sectional area, while still covering more of the rider’s body from the wind, the new RR fairing improves not only the top-end performance of the GP2, but also helps reduce rider fatigue during long-race durations.

The new front fairing design also allows for a more powerful ram-air effect into the GP2-890RR’s airbox, helping boost the peak performance of the bike at high speeds.

The overall effect is a 9% improvement on the aerodynamic efficiency of the “RR” model over the “R” bike, and when coupled with the increased power from the revised 889cc motor, the top speed is increased by over 9 mph (15 km/h).

The bodywork ingenuity continues with a hallmark of Krämer design: the fuel cell doubling as the tail section of the motorcycle. 4.2 gallons (16 liters) of fuel can be held in the rotationally molded plastic tank. Lastly, an integrated rain light finishes the tail section’s shape and design.

The 2024 Krämer GP2-890RR will be finished in a “Brno Blue” matte paint, while the US market will also include a “Brainerd Black” gloss paint option.